Wine analyzer: Alcolyzer Wine
Use the wine analysis system Alcolyzer Wine M/ME to determine the alcohol content of your wine quickly and easily. When combined with a density meter, Alcolyzer Wine M/ME determines further parameters in a single cycle, e.g. extract content. The patented NIR measuring method eliminates the influence of other sample constituents on the alcohol measurement and therefore guarantees highly precise results
  1. Features
  2. Specification

 

Efficient and high-performance wine analysis

·       Measure the alcohol content of wine, sparkling wine, cider and sake from 0 to 20 %v/v

·       Other wine constituents have no influence on the alcohol analysis

·       Fill the measuring cell via syringe, peristaltic pump or automatic sample changer

·       Low sample volume, high sample throughput

Save time in the lab

·       Minimum sample preparation

·       Short measuring cycles

·       No cleaning between samples

Universal adjustment saves you time

·       Adjustment/calibration with water and an alcohol/water solution

·       One single adjustment is valid for all your samples

 

Measuring range

0 to 20 %v/v

Accuracy

better than ±0.1 %v/v alcohol

Repeatability s.d.

±0.01 %v/v alcohol

Temperature control

Built-in solid-state thermostat (Peltier)

Temperature repeatability

±0.01 °C

Minimum amount of sample

3 mL

Typical measuring time per sample

2 minutes

Sample throughput

10 to 30 per hour

Interfaces (Master instrument)

4x USB (for USB flash drive, keyboard, mouse, barcode reader or printer), Ethernet (LAN), RS-232, CAN

Interfaces (Module)

CAN