WaterPro PS Polishing Stations
WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage.
  1. Features
  2. Specification

·       User-friendly control panel with digital display.

·       Water quality alert.

·       Attractive and corrosion-resistant Type 304 stainless steel front panel. The epoxy-coated steel cabinet

·       In-line pressure regulator protects the system from excessive water pressure and ensures that inlet water enters the system at optimum pressure (up to 100 psi).

·       WaterPro PS Polishing Stations choose models as:

Model General Chemistry với công nghệ lọc:

Carbon Filtration

Deionization

Continuous/Intermittent Recirculation

Optional Hollow Fiber Final Filter

Model HPLC Analytical với công nghệ lọc:

Carbon Filtration

Deionization

Organic Adsorption

Ultraviolet Reactor

TOC Dump Valve

Continuous/Intermittent Recirculation

Optional Hollow Fiber Final Filter

Model UF Life Sciences với công nghệ lọc:

Carbon Filtration

Ultrafiltration

Utrafilter Flush Valve

Ultraviolet Reactor

Continuous/Intermittent Recirculation

Optional Hollow Fiber Final Filter

Model HPLC/UF Hybrid với công nghệ lọc:

Carbon Filtration

Deionization

Organic Adsorption

Ultrafiltration

Ultrafilter Flush/TOC Dump Valve

Ultraviolet Reactor

Continuous/Intermittent Recirculation

Optional Hollow Fiber Final Filter

·       Time set in minutes: from 0 to 99.9

·       Rotary vane recirculation pump: 1/4 hp.

·       Diplay: LED

·       Specific resistance set point: from 0 to 16 megohm-cm

·       Typical dispensing rates:

Model General Chemistry and Model HPLC Analytical: 1.8 liters/minute or 1.2 liters/minute (optional Hollow Fiber Final Filter)

Model UF Life Sciences: 1.1 liters/minute or 1.0 liters/minute (optional Hollow Fiber Final Filter)

Model HPLC/UF Hybrid: 1.8 liters/minute or 1.0 liters/minute (optional Hollow Fiber Final Filter)

·       Water produced:

+ Specific resistance: 18.2 megohm-cm

+ TOC:

Model General Chemistry and Model UF Life Sciences: < 10 ppb

Model HPLC Analytical and Model HPLC/UF Hybrid < 5 ppb

+ Bacteria:

Model General Chemistry and Model HPLC Analytical: < 1 cfu/ml (with optional Hollow Fiber Final Filter)

Model UF Life Sciences and Model HPLC/UF Hybrid: < 1 cfu/100ml

+ Silicate: Not detecable

+ Pyrogens with Model UF Life Sciences and Model HPLC/UF Hybrid: pyrogen-free to 0.06 eu/ml

+ Water Standards: Meets or exceeds ASTM and NCCLS type I specifications

·       Feedwater requirements:

+ Water purity: 100 µs conductivity or better

+ Minimum pressure: 0 psi

+ Maximum pressure: 100 psi

+ Temperature: 4-300C

+ pH: 5-9