Pull-off strength (bond strength)
  1. Features
  2. Specification

58-C0215/T Digital bond strength/pull-off tester. Capacity 16 kN

STANDARDS: EN 1015-12, 1348, 1542, 12618-2, 13963, 14496

Introduction  

This method is particularly suitable for applications concerning testing repairs of concrete structures where the bond strength between two layers is an impor­tant factor. The same principle is applied to test the adhesive strength of different type of surface coatings like cement plaster, lime, wall plaster, etc. on its support.  

We propose a high resolution digital mode suitable for measurements up to 16 kN assuring a wide working range ideal for a vast number of materials and applications.

The tester is supplied complete with car­rying case. It can be completed with 20 and 50 mm dia. bits, metal test discs 20 and 50 mm dia. and adhesive compound. See accessories, code 58-C0215/20.

 

General description  

The apparatus is basically a dynamometer fitted with a load cell and high resolution digital display unit. The direct tensile force is applied by rotating the hand wheel.

 

Specifications 

  • Load cap.                                : 16 kN
  • Readout unit                            : Load cell
  • Resolution                               : 10 N
  • Working range                         : 0.25 to 16 kN
  • Accuracy                                 : Better than ± 1%
  • Dimensions                             : 340x240x250 mm approx.
  • Total weight approx.                : 5 kg with carrying case, 3.3 kg tester only

 

Specifications 

  • Load cap.                                : 16 kN
  • Readout unit                            : Load cell
  • Resolution                               : 10 N
  • Working range                         : 0.25 to 16 kN
  • Accuracy                                 : Better than ± 1%
  • Dimensions                             : 340x240x250 mm approx.
  • Total weight approx.                : 5 kg with carrying case, 3.3 kg tester only