Home page » products » O2 and CO2 Meter in Beverage » Combined CO₂ and O₂ Meter: CboxQC™
CboxQC™ is the precise combined CO2 and O2 meter which allows reliable QC on finished packages as well as highly accurate measurements in the laboratory for product development. When combined with Anton Paar’s PFD filling device, sample is taken directly from the package into the measuring chamber of CboxQC™ – with no loss of dissolved carbon dioxide and dissolved oxygen during sample transfer. CboxQC™ for the laboratory provides reliable CO2 and O2 results, even out of very small packages.
Features
       -          CO2 measurement based on the patented Multiple Volume Expansion method guarantees repeatability standard deviation of 0.005 vol.

-          No influence of other dissolved gases such as air or nitrogen

-          The new high-resolution optochemical O2 sensor is accurate and achieves a repeatability standarddeviation of ±2 ppb

-          Low sample volume of around 100 mL provides reliable CO2 and O2 results, even out of very small packages

-          CO2 and O2 results after only 90 seconds

-          Intuitive user interface with clearly arranged navigation of the menu

-          Clear sample identification for full traceability of 500 measurement results

-          FillingCheck™: automatically detects fillingerrors and generates a warning message

-          System Check: guides the operator through recommended periodical checks

-          The TPO (total package oxygen) value can be calculated via Anton Paar’s free software AP-SoftPrint or by connecting to a DMA Generation M system

   -          Auto-valves: Automatically opens and closes inlet/outlet valves by only one Start or Rinsing press

   -          Rinsing Time: Use the rinsing time setting to adjust the transported sample volume for measuring, it is set between 10 and 300 seconds. After that time, inlet/outlet valves will be closed automatically, no need any press of operator

   -          Sample IDs: You can assign a sample ID to each sample. This function helps to uniquely assign measured data to samples (sample identification) and the measuring point where the sample was taken, etc. You can save up to 19 different sample IDs for full traceability of your results. Sample IDs can have up to 10 characters.

  -    Methods: The instrument is equipped with eight predefined methods and 21 additional custom methods.

Fast and wireless

-          Bluetooth interface for wireless printing

-          USB interface for data transfer to a PC

 

-          RFID interface for changing measurement settings quickly byreading RFID tags

Specification

 Measuring range of CO2

0 g/L to 12 g/L(0 vol. to 6vol.) at 30 °C
0g/L to 20 g/L (0 vol. to 10 vol.) < 15 °C

Repeatability s.d. of CO2: 0.01 g/L (0.005 vol.)

Measuring units: g/L, vol., kg/m3

Measuring range of O2: 0 ppm to 4 ppm

Repeatabilitys.d. of O2: ± 2 ppb (in the range < 200 ppb)

Measuring units: mg/L, ppm, ppb, % sat., μg/L

Measuring range of Temperature: -3 °C to +40°C (27°F to 104°F); Accuracy: ± 0.2 °C

Measuring range of Pressure: 0 bar to 10 bar absolute (0 psi to 145 psi)

Resolution of CO2: 0.001 g/L

Resolution of O2: 0.1 ppb (in the range < 100 ppb)

Additional information

Sample volume: approx. 100 mL

Measuring timeper sample: approx. 90 seconds

Internal storage: 500 measured results

Interfaces:

  • 1 x RS-232 for PC and printer
  • 1 x USB for PC
  • 1 x RFID, 1 x Bluetooth (optional)

Protection class: IP67

Power supply: AC 100 - 240 V, 50/60 Hz,1.5 A;
DC 12 V, 3.,0 A

Rechargeable battery type: Li-Ion 11.1 V, 2.25 Ah (optional: Li-Ion 11.25 V, 2.6 Ah)

Maximum at-line operation: 10 hours

Dimensions (Lx W x H): 258 mm x 201 mm x 170 mm (10.2 in x 7.9 in x 6.7 in)

Weight: 2.6 kg (5.7 lbs)

Print