Home page » products » Construction Materials Testing  »  Soil Testing Equipment » AUTOSHEAR, direct/residual shear machine, digital control of speed and data acquisition via the Automax control system
Features

27-WF2160 AUTOSHEAR, direct/residual shear machine, digital control of speed and data acquisition via the Automax control system

110-240 V, 50-60 Hz, 1 ph.

STANDARDS: ASTM D3080 / BS1377:7 / AASHTO T236 / NF P094 071-1/2 / CEN-ISO/TS17892-10

General description  

The basic structure of this machine is iden­tical to the standard 27-WF2060 model, except for the electronic part, which is based on our Automax unit, this is a micro­processor system that reads and processes horizontal force and displacement readings, manages the motor and the safety con­trols through closed loop systems, assuring important features:

  • Automatic test running
  • Test speed closed loop control
  • Large monochromatic graphic display 240x128 pixel to view data recording in real time
  • Diferent calibration functions (linear and polynomial)
  • Language selection
  • Travel and cycles programmable by 10 but­ton membrane keyboard with 4 interactive specific icons
  • Continuous monitoring and display of horizontal force, vertical and horizontal displacement
  • Maximum horizontal displacement (20 mm) is controlled by mechanical and optical safety switch
  • Different recording modes (linear, expo­nential (square root), logaritmic, etc.)
  • High capacity data memory (up to 1000 lines of data)
  • RAM memory with battery back-up with clock/calendar, operating also when the unit is switched off.

The new design of the horizontal loading system provides straight-rigid alignment of loading ram, shear box, and loading meas­urement system, to increase the stiffness of transmission of the horizontal force along the shearing plane.

The beam loading device for the applica­tion of vertical load (1:10 ratio) and the ASTM balancing frame are included in the machine.

Excellent quality and high resistance techno-polymeric material as been adopted for the carriage of the shear box. It offers excellent resistance to corrosion, wear and tear and it is resistant to all chemical found in a soil specimen. The carriage is light weight and easy to clean.

Specifications  

  • Speed range                           : 0.00001 to 11.00000 mm/min
  • Maximum shear force             : 5000 N
  • Maximum vertical load            : 500 N/5000 N using the 10:1 lever loading device
  • Horizontal travel: preset via firmware up to 19 mm
  • Cycles                                     : up to 9 (forward and reverse)
  • Specimen size 60x60 mm, 100x100 mm; 50, 60, 63.5 and 100 mm dia. (lxdxh)
  • Overall dimensions                 : 953x387x1180 mm
  • Weight approx.                        : 120 kg

 

 

Specification

Specifications  

  • Speed range                           : 0.00001 to 11.00000 mm/min
  • Maximum shear force             : 5000 N
  • Maximum vertical load            : 500 N/5000 N using the 10:1 lever loading device
  • Horizontal travel: preset via firmware up to 19 mm
  • Cycles                                     : up to 9 (forward and reverse)
  • Specimen size 60x60 mm, 100x100 mm; 50, 60, 63.5 and 100 mm dia. (lxdxh)
  • Overall dimensions                 : 953x387x1180 mm
  • Weight approx.                        : 120 kg
Print